-
ProductsFocus on the development and manufacture of high temperature furnace monitoring and furnace thermal imager
-
IndustryFocus on the development and manufacture of high temperature furnace monitoring and furnace thermal imager
-
ApplicationsFocus on the development and manufacture of high temperature furnace monitoring and furnace thermal imager
-
-
BlogFocus on the development and manufacture of high temperature furnace monitoring and furnace thermal imager
-
-
Products
Focus on the development and manufacture of high temperature furnace monitoring and furnace thermal imager
Read More > -
Industry
Focus on the development and manufacture of high temperature furnace monitoring and furnace thermal imager
Read More > -
Applications
Focus on the development and manufacture of high temperature furnace monitoring and furnace thermal imager
Read More > -
About Us
Focus on the development and manufacture of high temperature furnace monitoring and furnace thermal imager
Read More > -
Blog
Focus on the development and manufacture of high temperature furnace monitoring and furnace thermal imager
Read More > -
Contact Us
Focus on the development and manufacture of high temperature furnace monitoring and furnace thermal imager
Read More >
Applications
Special endoscope for glass tin bath
Observation for tin baths in float glass production lines
Dedicated to providing intelligent and high-precision industrial vision solutions for the metallurgical, cement, glass, and chemical industries
Keywords: High-temperature industrial special optical monitoring | Infrared thermal imaging temperature measurement system | Industrial vision
Product Brief:
Observation for tin bath in float glass production line
Product Name:
Glass tin bath endoscope
Model:
RB-XCNK
Product Image:
Product Brief:
Glass kiln plug-in type, the probe cover can extend into the kiln for several meters
— Observing along the moving direction of the glass plate through a 90° high-temperature zoom pinhole lens, a more intuitive and comprehensive observation of the working conditions in the tin bath
— The probe cover can be adjusted to be parallel to the edge puller, and by adjusting the lens direction and field of view angle, several edge pullers can be observed simultaneously
— The zoomed image can accurately observe the depth and width of only one edge wheel and edge wheel pressed into the glass plate.
— By adjusting the direction of the lens and the angle of the field of view, the distance between the tooth marks and the edge of the plate can be visually observed and roughly measured on the image.
— The probe cover is made of stainless steel, with good temperature/corrosion resistance
— special dust-proof design, the lens is not easy to accumulate dust
—Special water cooling design, can prolong the service life under the same water quality conditions
— The probe cover is added with a thermal insulation layer to reduce the impact on the temperature in the tin bath, environmental protection and energy saving
— self-developed and produced high temperature pinhole zoom lens, the horizontal resolution is greater than 520 lines, and the temperature resistance is 150 degrees
— Manual zoom high temperature pinhole lens can be used to meet the observation requirements of different kilns and different production processes
— optional motorized zoom high temperature pinhole lens to adjust image size range and sharpness in the control room
— optional manual advance and retreat of the rack
— optional electric advance and retreat control frame (manual when the probe cover is moved in a large range, and electric when fine-tuning within a local 500mm range)
— forward and backward control of the equipment through DCS (electric)
Technical parameters
Lens sharpness: not less than 520 lines horizontally
Lens variable focal length: F7-F20 continuously adjustable.
Compressed air (using nitrogen)
The total intake pipe is: G1/2
Connecting nozzle: G1/2″(plus stop valve)
Inlet pressure: ≥kiln pressure 2KPa (when the valve is open)
Inlet temperature: ≤35℃
Minimum flow: 0.08 cubic meters
Cooling water
The main inlet pipe is G3/4“
Connecting nozzle: G3/4″(plus stop valve)
Inlet pressure: 0.1Mpa -- 0.4Mpa
Minimum flow: 30L/min
Inlet temperature: ≤35℃
Ambient operating temperature
On-site control box: 5~50℃
Temperature in furnace: ≤1100℃ (for continuous use)
Water jacket size: length 1000mm-4000mm, outer diameter ￠89mm, inner diameter ￠46mm
Related Cases
Online Message
If you are interested in our products, please leave your email address, and we will contact you as soon as possible, thank you!
Contact Us
Fax: 0519-86692128
Address: No. 108 Taihu West Road, Xinbei District, Changzhou, Jiangsu
Copyright: Changzhou Rongbang Automation Equipment Co., Ltd.
