The high temperature camera is no longer a strange device, it is widely used in industry. High temperature monitoring uses pinhole imaging technology and a transmission device made of guide rails, which can fundamentally solve the positive pressure and radiation in the kiln and greatly improve reliability. Precautions.

Precautions when using a high temperature camera:

1. High-temperature pinhole lens manufacturers introduce moisture-proof, anti-corrosion, and dust-proof: For various acquisition equipment of the monitoring system, since the equipment is directly placed in a dusty and humid environment, it will have a direct impact on the equipment, so it is necessary to focus on preventing Dust and moisture-proof maintenance work, such as the camera in the workshop, is quickly covered with a layer of dust, carbonic acid and other mixtures on the dust-proof glass, which is dirty, black, and corrosive, which not only seriously affects the viewing effect, but also damages the equipment.

2. Lightning protection: After the company's monitoring equipment is in operation, it is often struck by lightning, which causes great safety hazards to the normal operation of the monitoring equipment. Therefore, in the process of equipment maintenance, we must attach great importance to lightning protection. The main measures for lightning protection are: Ground the equipment to the lightning protection net, and make the cameras set in the minefield well isolated from the conductive objects.

3. Transmission line maintenance: Whether the aging of the transmission line interface affects the transmission of video signals, for lines with many interfaces, replace the entire transmission line.

Introduction of high temperature camera manufacturers: Usually, routine maintenance is mainly to carry out troubleshooting in a short period of time in the case of sudden failure or blurred lens during operation. In terms of shutdown maintenance, the maintenance content includes cleaning the dust on the actuator track, adding grease, Regularly drain the accumulated water in the compressed air-water separator, regularly check the pipes and cable connections, regularly check and clean the camera, etc.